Leveling wedge set LEVEL SYSTEM WEDGE 100pcs

Leveling wedge set LEVEL SYSTEM WEDGE 100pcs SIXTOL

A set of high-quality leveling wedges LEVEL SYSTEM WEDGE for leveling tiles and wall coverings consisting of 100 pieces of leveling wedges. These wedges are used in combination with leveling clips and pliers during the laying of tiles in a plane - you insert the clips into the joints according to the width of the joint, insert the wedge into the clip and use special leveling pliers to level the tiles or wall coverings in a plane. Once the adhesive under the tiles has hardened, use a rubber mallet to knock the clips down, fill the joints and you're done. Clips, pliers and a mallet are not part of this set and must be purchased separately as needed.

Main advantages:

• Easy, fast and precise laying of tiles and paving stones
• Eliminates height inequalities between tiles and paving stones, so-called lippage
• Suitable for tiles and paving stones of all materials and shapes
• The wedges can be used repeatedly

Usage:

• 1. During laying, insert clips with a width according to the desired joint width into the joints between the tiles or paving stones.
• 2. Insert the wedges into all the clips.
• 3. Use the leveling pliers to pull the first wedge into the clip until the tiles are level.
• 4. Screw the fixing screw on the pliers according to the first wedge to pull the rest of the paving stones or paving stones with the same force.
• 5. Tighten the rest of the wedges.
• 6. After the glue has set (usually after 24 hours), remove the clips by hitting them with a rubber mallet from the side in the direction of the joint.
• Note: The wedges can be used repeatedly.
• Note: The joint must be clean to properly remove the clips with a mallet.

Package contents:

• 100 x Leveling wedges

Technical parameters:

• Dimensions (L x W x H): 90 x 21 x 15.5 mm
• Material: plastic