Dehumidifying sachet for car DRY CAR ONE 350 g

The practical DRY CAR dehumidifying sachet absorbs unwanted moisture from the air, thereby protecting the interior of your vehicle or home.

Full description
Dehumidifying sachet for car DRY CAR ONE 350 g
  • Code: SX4059
  • EAN: 8595697701504
SixtolYou can purchase the goods from the seller Sixtol
Out of stock
8,69 Eur including VAT

Dehumidifying sachet for car DRY CAR ONE 350 g SIXTOL

For clear/transparent windows and a dry interior. DRY CAR dehumidifying sachets absorb unwanted moisture from the air, thereby protecting the interior of your vehicle or home, your clothing and other items from mold, slowing metal corrosion caused by high humidity and also serving as an attractive accessory. The DRY CAR sachets contain 350 g of drying beads made of silica gel, which absorb approximately 120 ml of water from the air and retain it. Once the maximum capacity of the sachet is reached, the blue indicator dot will turn pink and the sachet needs to be dried before further use. The sachet can be easily dried in just 30 minutes in a kitchen oven set to a maximum of 70–80 °C and then is ready for use again. Besides removing moisture in the car, the sachet is also suitable for a caravan or home, especially for wardrobes with clothing, kitchens, children's rooms, bathrooms, storage spaces and other places where unwanted moisture forms. DRY CAR dehumidifying sachets are a simple but very effective tool measuring 12 x 20 x 4 cm that will rid you of excessive humidity.

Main advantages:
  • Absorb unwanted moisture from the air
  • Hold approximately 120 ml of water
  • Can be dried in just 30 minutes and reused
  • Equipped with a practical hanging loop
  • No power required
  • Functional lifespan up to 2 years
Set contents:
  • 350 g dehumidifying sachet with silica gel beads
Instructions for use:
  • Remove the dehumidifying sachet from the plastic packaging.
  • Place it where the most moisture accumulates.
  • When the sachet is full, the blue dot will turn pink and it needs to be dried before further use.
  • Dry the sachet on a radiator (approximately within 24 hours) or in a preheated kitchen oven at 70–80 °C. Once the oven is sufficiently preheated, place the sachet on the oven rack, a baking tray or a plate for 30 minutes with the indicator dot facing up.
  • After drying the sachet can be used again.
Uses of the sachets:
  • Removes moisture inside the car — prevents fogged windows
  • Removes moisture around windows in the home
  • Removes moisture in the kitchen or bathroom
  • Removes moisture in wardrobes, storage spaces, etc.
Technical specifications:
  • Sachet dimensions: 12 x 20 x 4 cm
  • Package dimensions: 11 x 19 x 5 cm
  • Sachet weight: 350 g
  • Sachet material: outer cover made of microfiber 80% polyester and 20% polyamide, inner cover made of non-woven fabric, filling of the sachet made of silica gel beads

Main parameters

  • EAN8595697701504
  • CodeSX4059
  • Package weight0,45 kg
  • Package height5 cm
  • Package length19 cm
  • Package width11 cm
Full description and parameters Hide description and parameters

Latest customer questions

Scissor jack with ratchet SX SCISSOR JACK 2T

Scissor jack with ratchet SX SCISSOR JACK 2T - What are the dimensions of tthe rubber pad?

Jiří, 21. 11. 2025

Hello, the dimensions of the jack pad are 3.5x4.5cm.

— Team Sixtol, 24. 11. 2025
Hydraulic bottle jack SX BOTTLE JACK 4T

Hello,I would like to ask whether a load-distributing pad that fits between the jack and the car can be purchased for the Hydraulický zdvihák fľaškový SX BOTTLE JACK 4T.Or which jack would you recommend for a Mercedes‑Benz V‑Class?Thank you for your reply.Miroslav Hanzen

Miroslav, 28. 01. 2026

Hello, pán Hanzen,thank you for your inquiry. We don't have an original "load-distributing pad" for the SX BOTTLE JACK 4T (SX1146), but you can use a standard rubber pad/adapter for the jack (jack pad) between the jack and the vehicle's jacking point. For the Mercedes-Benz V‑Class the 4T capacity is fine; what's important is that the jack's minimum height (when lowered) fits under the car. If…

— Team Sixtol, 28. 01. 2026
Car cup holder expander CAR CUP HOLDER 5

Hello, which specific type of expander for the cup holder should I order for this original cup holder in the Kodiaq (the opening only fits a standard can)…

Karel, 15. 03. 2026

Hello Mr. Bárta,thank you for your inquiry.For the original cup holder in the Škoda Kodiaq you mentioned, we recommend using the SIXTOL CAR CUP HOLDER 5 model.This expander has an adjustable lower base ranging from 6.5 to 10 cm, so it will adapt even to smaller original holders (a standard can has a diameter of 6.5 cm). At the same time it has a top diameter of approximately 9.6 cm, which…

— Team Sixtol, 24. 03. 2026
Workshop tool trolley MECHANIC TROLLEY JASON, 3 drawers, 1 shelf

Good morning,Will it be possible to purchase this stroller from you in the near future?Best regards

Tomasz, 15. 03. 2026

Hello, delivery to the warehouse will take place in the first half of April. We apologize for the inconvenience.

— Team Sixtol, 16. 03. 2026
AVM Freewheel 406HP - Land Rover

Good morning, I wanted to know whether the AVM406HP freewheel coupling would be suitable for an Iveco Massif. Thank you

Salvatore, 23. 03. 2026

Hello,thank you for your inquiry. According to AVM's application table, the model AVM 406MI is listed for the Iveco Massif. For the product AVM406HP we currently have inconsistent information on the website, so we cannot confirm its suitability for the Iveco Massif 100% at this time.To give you an exact answer, we recommend verifying compatibility by VIN / exact year of manufacture and type of…

— Team Sixtol, 25. 03. 2026
Towbar bike carrier E-BIKE 2 - 2 electric bikes

Good morning, my name is Fernando Montero.I am writing to ask whether it would be possible to purchase the rails on which the bicycle wheels rest for your e-bike rack model (SX1014).Thank you very much for your attention.Regards.

Fernando, 01. 12. 2025

Hello, yes, that is possible. We can send it to you from our service center. Please write to us at info@sixtol.com and we will take care of it.

— Team Sixtol, 05. 12. 2025
MECHANIC TROLLEY KEVIN 80 workshop trolley with tools, 7 drawers, 80 pcs of tools

Dear Sir or Madam! My question is when will a workshop trolley with tools be available?Sincerely: Tamás

Tamás, 24. 03. 2026

Hello, the expected delivery date is April 8, 2026. We apologize for the outage.

— Team Sixtol, 25. 03. 2026
Hydraulic cylinder for low-profile jack SX JACK 2.5t - spare part

Hello, could you please tell me the distance between the two mounting holes? And what is the diameter of the cylinder? Are the holes 20 mm? Thank you very much.

Simon, 09. 02. 2026

Hello,the center-to-center distance between the mounting holes is 21 cm.The diameter of the holes is 19.8 mm.

— Team Sixtol, 17. 02. 2026
Cap with LED light B-CAP 25 lm, rechargeable, USB, universal size, red

Hello, I've bought your hat via Amazon last year and now the battery seems working no more... Do you sell it separetely? Just the batteryThank you

Marco, 02. 09. 2025

Hello,write us an email at info@sixtol.com and we will send you a battery for free. We apologize for the inconvenience :-)

— Team Sixtol, 04. 09. 2025
Auto-darkening welding helmet WELDING MASK 2, red

Hello,Could you send me the user manual for the buttons inside the helmet?Kind regards,Sophie PÉRIER.

Sophie, 22. 01. 2026

Hello Madame PÉRIER,Thank you for your message. Here is the link to the document to download: https://www.sixtol.fr/casque-de-soudage-auto-obscurcissant-welding-mask-2-rouge.html#tab-documentsTo help you quickly, here is a summary of the controls inside the helmet:• Knob “Delay”: adjusts the time to return to the clear state after welding.• Knob “Sensitivity”: adjusts the filter sensitivity…

— Team Sixtol, 24. 01. 2026
  • Over 4 000 products in stock
  • High-quality products
  • Strong international presence
  • Official vendor for Amazon
  • Over 80 sales partners