Diesel engine cylinder pressure test kit MECHANIC ENGINE TESTER 21, 0-70 bar, 21 pcs SIXTOLService 21-piece kit for testing diesel engine compression SIXTOL MECHANIC ENGINE TESTER 21 with an analog gauge calibrated 0-70 bar and 0-1000 psi. The kit includes a flexible hose, a wide range of fittings and seals. This kit helps detect wear and leaks around piston rings and other defects causing pressure loss from the engine. Tools are stored in a plastic case for easy storage and transport.Main advantages:- Easy to use- Release valve- Wide range of fittings- Sturdy case for transport and storageKit contents:- 1x analog gauge with flexible hose 0-70 bar and 0-1000 psi- 20x clamps, fittings and adapters- 1x plastic caseUsage:- Testing compression of diesel engines- Detecting engine leaksTechnical specifications:- Gauge type: analog- Gauge scale: 0-70 bar and 0-1000 psi- Material: aluminum, rubber- Package dimensions: 7.5 x 27 x 37.5 cm- Weight: 1.85 kg
Hello,Could you send me the user manual for the buttons inside the helmet?Kind regards,Sophie PÉRIER.
Sophie, 22. 01. 2026
Hello Madame PÉRIER,Thank you for your message. Here is the link to the document to download: https://www.sixtol.fr/casque-de-soudage-auto-obscurcissant-welding-mask-2-rouge.html#tab-documentsTo help you quickly, here is a summary of the controls inside the helmet:• Knob “Delay”: adjusts the time to return to the clear state after welding.• Knob “Sensitivity”: adjusts the filter sensitivity…
Hello, can I transport 2 e-bikes and 2 children's bikes with this carrier? The children's bikes are one 16-inch and one 20-inch. Thank you in advance for a prompt reply.Kind regards
M, 28. 03. 2026
Hello,this rack is primarily intended for transporting 4 conventional bicycles, not e-bikes, mainly due to their higher weight.In the case of a combination of 2 e-bikes and 2 children's bikes, you must thoroughly check the total weight of all bikes. The rack's maximum load capacity is 60 kg and this value cannot be exceeded.We therefore recommend considering transporting the children's…
Hello, which specific type of expander for the cup holder should I order for this original cup holder in the Kodiaq (the opening only fits a standard can)…
Karel, 15. 03. 2026
Hello Mr. Bárta,thank you for your inquiry.For the original cup holder in the Škoda Kodiaq you mentioned, we recommend using the SIXTOL CAR CUP HOLDER 5 model.This expander has an adjustable lower base ranging from 6.5 to 10 cm, so it will adapt even to smaller original holders (a standard can has a diameter of 6.5 cm). At the same time it has a top diameter of approximately 9.6 cm, which…
Good morning, my name is Fernando Montero.I am writing to ask whether it would be possible to purchase the rails on which the bicycle wheels rest for your e-bike rack model (SX1014).Thank you very much for your attention.Regards.
Fernando, 01. 12. 2025
Hello, yes, that is possible. We can send it to you from our service center. Please write to us at info@sixtol.com and we will take care of it.
Good morning, I wanted to know whether the AVM406HP freewheel coupling would be suitable for an Iveco Massif. Thank you
Salvatore, 23. 03. 2026
Hello,thank you for your inquiry. According to AVM's application table, the model AVM 406MI is listed for the Iveco Massif. For the product AVM406HP we currently have inconsistent information on the website, so we cannot confirm its suitability for the Iveco Massif 100% at this time.To give you an exact answer, we recommend verifying compatibility by VIN / exact year of manufacture and type of…
Hello,I would like to ask whether a load-distributing pad that fits between the jack and the car can be purchased for the Hydraulický zdvihák fľaškový SX BOTTLE JACK 4T.Or which jack would you recommend for a Mercedes‑Benz V‑Class?Thank you for your reply.Miroslav Hanzen
Miroslav, 28. 01. 2026
Hello, pán Hanzen,thank you for your inquiry. We don't have an original "load-distributing pad" for the SX BOTTLE JACK 4T (SX1146), but you can use a standard rubber pad/adapter for the jack (jack pad) between the jack and the vehicle's jacking point. For the Mercedes-Benz V‑Class the 4T capacity is fine; what's important is that the jack's minimum height (when lowered) fits under the car. If…