Leveling wedges set LEVEL SYSTEM WEDGE 100 pcs

Leveling wedges set LEVEL SYSTEM WEDGE 100 pcs SIXTOL

A set of quality leveling wedges LEVEL SYSTEM WEDGE for leveling tiles and coverings consisting of 100 leveling wedges. These wedges are used in combination with leveling clips and pliers during laying to level tiles - insert the clips into the joints according to the joint width, insert the wedge into the clip and use the special leveling pliers to align the tiles or coverings into one plane. Once the adhesive under the tile has set, hit off the clips with the rubber mallet, finish the joints and you're done. Clips, pliers and mallet are not included in this set and must be purchased as needed.

Main advantages:

• Easy, quick and precise laying of tiles and coverings
• Eliminates height differences between tiles, so-called lippage
• Suitable for tiles and coverings of all materials and shapes
• Wedges can be reused

Usage:

• 1. During laying, insert clips into the joints between tiles according to the desired joint width.
• 2. Insert wedges into all clips.
• 3. Use the leveling pliers to pull the first wedge into the clip until the tiles are level.
• 4. Using the first wedge as reference, tighten the locking screw on the pliers so that the rest of the tiles or coverings are pulled with the same force.
• 5. Tighten the remaining wedges.
• 6. After the adhesive has set (usually after 24 hours), remove the clips by striking them from the side in the direction of the joint with the rubber mallet.
• Note: Wedges can be reused.
• Note: For correct removal of clips with the mallet, the joint must be clean.

Package contents:

• 100 x Leveling wedges

Technical specifications:

• Dimensions (L x W x H): 90 x 21 x 15.5 mm
• Material: plastic