Manual fluid extractor MECHANIC OIL EXTRACTOR 3, 800 ml
The manual fluid extractor MECHANIC OIL EXTRACTOR 3 with a capacity of 800 ml allows easy and clean extraction and refilling of operating fluids in the workshop, garage and service.
Hand-operated fluid extractor MECHANIC OIL EXTRACTOR 3, 800 ml SIXTOL
The hand-operated fluid extractor SIXTOL MECHANIC OIL EXTRACTOR 3 with a capacity of 800 ml is a practical tool for the maintenance of cars, motorcycles, garden and workshop equipment. It allows effective and precise extraction or filling of engine oil, transmission fluids, cooling mixtures and brake fluid. Thanks to four hoses of different lengths and diameters, the device can be easily adapted to various applications and types of openings. The transparent container with a marked scale provides an immediate overview of the amount of liquid. The robust construction from durable plastic, nylon and rubber ensures long life even with regular use. The device is ideal for anyone who needs to handle fluids cleanly and precisely in hard-to-reach places.
Key benefits:
800 ml capacity for efficient work without frequent refilling
Transparent container with scale for precise control of liquid volume
4 hoses of different diameters and lengths for universal use
Robust construction from quality materials (PP, nylon, rubber)
Hose plugs to prevent liquid leakage during work
Easy to use – ideal for service work and the home garage
Applications:
Extracting oil from gearboxes, differentials, garden equipment or engines
Filling operating fluids into hard-to-reach places
Replacing brake fluid without disassembly
Precise dosing of fluids during vehicle maintenance
Suitable for hobby, home and professional service
Package contents:
Hand extractor 800 ml × 1
Hoses diameter 8 mm × length 21 cm × 2 pcs
Hoses diameter 6 mm × length 22.5 cm × 2 pcs
Spare seals (O-rings) × 2
Technical specifications:
Container capacity: 500 ml
Total length of the extractor: 41 cm
Material: PP, nylon, rubber
Hose lengths: 2× 21 cm (diameter 8 mm), 2× 22.5 cm (diameter 6 mm)
Dobrý den, dnes jsem si v Z boxu vyzvedla Ruční odsávačku provozních kapalin MECHANIC OIL EXTRACTOR 3. Přes veškerou snahu se mi nepodařilo navléct přechodový černý gumový váleček na modrou koncovku odsávačky. Zkoušeli jsme namazat mýdlem, ani to nepomohlo. Žádám o radu jak to udělat. Děkuji
Hello, today I picked up Ruční odsávačka provozních kapalin MECHANIC OIL EXTRACTOR 3 from Z boxu. Despite all efforts, I couldn't fit the transitional black rubber sleeve onto the extractor's blue nozzle. We tried lubricating it with soap, but that didn't help. I would like advice on how to do this. Thank you.
Dagmar, 16. 07. 2026
Original message in
Dobrý den,přechodový černý váleček slouží k propojení dvou hadiček nikoliv k propojení odsávačky s hadičkou.Jednu holou hadičku jen zasuňte do stažené modré koncovky, která po uvolnění hadičku v odsávačce zajístí. Uvnitř modré koncovky je také těsnění, které zajistí těsnost odsávačky při použití. Důkladně modrou koncovku stáhněte, hadičku dovnitř nadoraz zasuňte a následně modrou koncovku uvolněte. Hadička bude následně zajištěna.
Hello,The black transition sleeve is used to connect two tubes, not to connect the suction unit to a tube. Simply insert one plain tube into the pulled-down blue connector; when released, it will lock the tube in the suction unit. There is also a seal inside the blue connector that ensures the suction unit remains airtight during use. Pull the blue connector down firmly, insert the tube fully until it bottoms out, then release the blue connector. The tube will then be secured.
Hello, I purchased an AT 25 for measuring water content in honey. I have a problem. The printed manual in Czech and English says to calibrate with distilled water. At first I followed the instructions and even adjusted the calibration screw, until I found on the internet that this is nonsense — it simply doesn't work. I'm willing to buy a calibration solution, or do you have advice for how to…
Radovan, 08. 08. 2026
Hello, when you open the full description of this product on our site Sixtol.cz, the calibration section states that a calibration solution is used. However, the description also says that the special solution is not included in the package. I would therefore recommend purchasing a calibration solution separately. We apologize for the inconsistency.Have a nice day.
Hello, this product has already been ordered, but the shipment containing these goods will not arrive until approximately the beginning of October. Have a nice day.
Good day, I would like to ask whether the listed fastening straps are also produced in a longer length; I would need 35 cm.Thank you.
Michal, 14. 08. 2026
Hello,we unfortunately do not have the same type of fastening strap in 35 cm length available. The closest similar variant we offer is SX1014E – quick-release strap for a towbar-mounted bike carrier, length 38 cm, black.However, this strap has slightly larger dimensions and a different attachment method, so we recommend verifying before purchase whether it will be suitable for your intended…
Dear Sir or Madam,I am interested in your AVM 455HP High Performance Freilaufnaben (the reinforced, high-load-capacity version — not the standard version) for my Toyota.Please check whether the AVM 455HP High Performance Freilaufnaben are suitable for my vehicle.Vehicle data:Toyota Land Cruiser Pick-up Single CabModel: GRJ79Year of manufacture: 2022Engine: 4.0 V6 petrol (1GR-FE)Manual…
Hedi, 26. 07. 2026
Yes. For the Toyota Land Cruiser GRJ79 Single Cab (70 series, from 7/2009 including model year 2022) the AVM 455 is the correct freewheel model.Have a nice day
Hello.Would this product be suitable for my 2018 Suzuki Vitara equipped with a fixed, precise connector? It’s the GL trim.
László, 14. 06. 2026
Hello, we don't know individual cars. Please select according to the file at this link.https://www.sixtol.hu/files/products_files/h/Hogyan_valasszunk_SIXTOL_keresztrudat_HU.pdfThank you
Hello,Could you send me the user manual for the buttons inside the helmet?Kind regards,Sophie PÉRIER.
Sophie, 22. 01. 2026
Hello Madame PÉRIER,Thank you for your message. Here is the link to the document to download: https://www.sixtol.fr/casque-de-soudage-auto-obscurcissant-welding-mask-2-rouge.html#tab-documentsTo help you quickly, here is a summary of the controls inside the helmet:• Knob “Delay”: adjusts the time to return to the clear state after welding.• Knob “Sensitivity”: adjusts the filter sensitivity…