00,00 Eur

Auto-darkening filter for WELDING welding helmet - spare part

Replacement auto-darkening filter for SIXTOL WELDING MASK welding helmet.

Full description
  • We recommend
Auto-darkening filter for WELDING welding helmet - spare part
  • Auto-darkening filter for WELDING welding helmet - spare part
  • Code: SX304301
  • EAN: 8595697702143
SixtolYou can purchase the goods from the seller Sixtol
In stock
8,65 Eur including VAT

Auto-darkening filter for welding helmet - SIXTOL replacement part

Replacement filter for the auto-darkening welding helmet SIXTOL WELDING MASK. This is a certified auto-darkening filter to protect vision while working. The filter's darkening intensity can be adjusted according to the type of work and exposure. After finishing work the filter returns to its original brightness. The filter includes an adjustment knob that allows you to darken or lighten the filter in the range 9-13 (DIN9 to DIN13) or set grinding mode (Grind). The filter is powered by solar cells and two backup replaceable 3V lithium CR2032 batteries, which are also included in the package. The filter is suitable for the following types of work: arc welding ARC, TIG, MIG, MMA, Spot, Micro, Wire, AC, DC, plasma welding and cutting.

Use:
  • SX3043 - Auto-darkening welding helmet WELDING MASK 1, black
  • SX3044 - Auto-darkening welding helmet WELDING MASK 2, red
  • SX3045 - Auto-darkening welding helmet WELDING MASK 3, blue
Package contents:
  • 1x Replacement filter for welding helmet
Technical specifications:
  • Filter size: 110 × 90 × 9 mm
  • Viewing window size: 92 × 42 mm
  • Light state: DIN 4
  • Dark state: DIN 9 - 13
  • Darkening time: 1/25000 s
  • Brightening delay: 0.2 - 0.8 s (adjustable)
  • Power source: solar cells + two replaceable 3V lithium CR2032 batteries
  • On/off: Fully automatic
  • Darkening: adjustable from outside
  • Number of sensors: 2
  • Sensitivity: adjustable 9-13 / grinding (Grinding)
  • Weight of welding helmet: 450 g
  • Operating temperature: -5 °C to 55 °C
  • UV/IR protection: DIN16
  • Optical class: 1/1/1/2
  • Suitable for: arc welding ARC, TIG, MIG, MMA, Spot, Micro, Wire, AC, DC, plasma welding and cutting
  • Certification: EN 166, EN 175, EN 379

Main parameters

  • EAN8595697702143
  • CodeSX304301
  • Package weight0,12 kg
  • Package height2,5 cm
  • Package length16 cm
  • Package width9,5 cm
Full description and parameters Hide description and parameters
  • Auto-darkening filter for WELDING welding helmet - spare part
  • Auto-darkening filter for WELDING welding helmet - spare part

Your questions

Zdravím,koupil jsem si od vás Filtr samostmívací do svářecí kukly WELDING - ale u náhradního dílu nebyl dodán návod k použití.(nastavení POTENCIOMETRŮ)Prosím o upřesnění,nebo kde si to mohu stáhnout.Díky

Hello, I bought a self-darkening filter for a WELDING welding helmet from you - but the spare part did not come with instructions for use. (POTENCIOMETER settings)Please clarify, or where I can download it. Thanks

Miroslav, 29. 07. 2025
cs
Original message incs

Dobrý den, u náhradních dílů není návod. Je to v návodu kukly. Ten si můžete klidně stáhnout na webu: https://www.torriacars.cz/svareci-kukla-samostmivaci-welding-mask-1-cerna-sixtols pozdravem Michal J. 

Hello, there are no instructions for the spare parts. It is in the instructions for the helmet. You can download it on the website: https://www.torriacars.cz/svareci-kukla-samostmivaci-welding-mask-1-cerna-sixtolregards Michal J. 

— Team Sixtol, 29. 07. 2025
Original message in

Latest customer questions

Cap with LED light B-CAP 25 lm, rechargeable, USB, universal size, red

Hello, I've bought your hat via Amazon last year and now the battery seems working no more... Do you sell it separetely? Just the batteryThank you

Marco, 02. 09. 2025

Hello,write us an email at info@sixtol.com and we will send you a battery for free. We apologize for the inconvenience :-)

— Team Sixtol, 04. 09. 2025
MECHANIC TROLLEY KEVIN 80 workshop trolley with tools, 7 drawers, 80 pcs of tools

Dear Sir or Madam! My question is when will a workshop trolley with tools be available?Sincerely: Tamás

Tamás, 24. 03. 2026

Hello, the expected delivery date is April 8, 2026. We apologize for the outage.

— Team Sixtol, 25. 03. 2026
Workshop tool trolley MECHANIC TROLLEY JASON, 3 drawers, 1 shelf

Good morning,Will it be possible to purchase this stroller from you in the near future?Best regards

Tomasz, 15. 03. 2026

Hello, delivery to the warehouse will take place in the first half of April. We apologize for the inconvenience.

— Team Sixtol, 16. 03. 2026
Car cup holder expander CAR CUP HOLDER 5

Hello, which specific type of expander for the cup holder should I order for this original cup holder in the Kodiaq (the opening only fits a standard can)…

Karel, 15. 03. 2026

Hello Mr. Bárta,thank you for your inquiry.For the original cup holder in the Škoda Kodiaq you mentioned, we recommend using the SIXTOL CAR CUP HOLDER 5 model.This expander has an adjustable lower base ranging from 6.5 to 10 cm, so it will adapt even to smaller original holders (a standard can has a diameter of 6.5 cm). At the same time it has a top diameter of approximately 9.6 cm, which…

— Team Sixtol, 24. 03. 2026
Scissor jack with ratchet SX SCISSOR JACK 2T

Scissor jack with ratchet SX SCISSOR JACK 2T - What are the dimensions of tthe rubber pad?

Jiří, 21. 11. 2025

Hello, the dimensions of the jack pad are 3.5x4.5cm.

— Team Sixtol, 24. 11. 2025
Towbar bike carrier E-BIKE 2 - 2 electric bikes

Good morning, my name is Fernando Montero.I am writing to ask whether it would be possible to purchase the rails on which the bicycle wheels rest for your e-bike rack model (SX1014).Thank you very much for your attention.Regards.

Fernando, 01. 12. 2025

Hello, yes, that is possible. We can send it to you from our service center. Please write to us at info@sixtol.com and we will take care of it.

— Team Sixtol, 05. 12. 2025
AVM Freewheel 406HP - Land Rover

Good morning, I wanted to know whether the AVM406HP freewheel coupling would be suitable for an Iveco Massif. Thank you

Salvatore, 23. 03. 2026

Hello,thank you for your inquiry. According to AVM's application table, the model AVM 406MI is listed for the Iveco Massif. For the product AVM406HP we currently have inconsistent information on the website, so we cannot confirm its suitability for the Iveco Massif 100% at this time.To give you an exact answer, we recommend verifying compatibility by VIN / exact year of manufacture and type of…

— Team Sixtol, 25. 03. 2026
Towbar bike carrier BIKE 4 - 4 bikes

Hello, can I transport 2 e-bikes and 2 children's bikes with this carrier? The children's bikes are one 16-inch and one 20-inch. Thank you in advance for a prompt reply.Kind regards

M, 28. 03. 2026

Hello,this rack is primarily intended for transporting 4 conventional bicycles, not e-bikes, mainly due to their higher weight.In the case of a combination of 2 e-bikes and 2 children's bikes, you must thoroughly check the total weight of all bikes. The rack's maximum load capacity is 60 kg and this value cannot be exceeded.We therefore recommend considering transporting the children's…

— Team Sixtol, 30. 03. 2026
Auto-darkening welding helmet WELDING MASK 2, red

Hello,Could you send me the user manual for the buttons inside the helmet?Kind regards,Sophie PÉRIER.

Sophie, 22. 01. 2026

Hello Madame PÉRIER,Thank you for your message. Here is the link to the document to download: https://www.sixtol.fr/casque-de-soudage-auto-obscurcissant-welding-mask-2-rouge.html#tab-documentsTo help you quickly, here is a summary of the controls inside the helmet:• Knob “Delay”: adjusts the time to return to the clear state after welding.• Knob “Sensitivity”: adjusts the filter sensitivity…

— Team Sixtol, 24. 01. 2026
Hydraulic bottle jack SX BOTTLE JACK 4T

Hello,I would like to ask whether a load-distributing pad that fits between the jack and the car can be purchased for the Hydraulický zdvihák fľaškový SX BOTTLE JACK 4T.Or which jack would you recommend for a Mercedes‑Benz V‑Class?Thank you for your reply.Miroslav Hanzen

Miroslav, 28. 01. 2026

Hello, pán Hanzen,thank you for your inquiry. We don't have an original "load-distributing pad" for the SX BOTTLE JACK 4T (SX1146), but you can use a standard rubber pad/adapter for the jack (jack pad) between the jack and the vehicle's jacking point. For the Mercedes-Benz V‑Class the 4T capacity is fine; what's important is that the jack's minimum height (when lowered) fits under the car. If…

— Team Sixtol, 28. 01. 2026
  • Over 4 000 products in stock
  • High-quality products
  • Strong international presence
  • Official vendor for Amazon
  • Over 80 sales partners