00,00 Eur

Hydraulic cylinder for low-profile jack SX JACK 2.5t - spare part

Replacement hydraulic cylinder for the mobile low-profile jack SIXTOL SX JACK 2.5T.

Full description
  • We recommend
Hydraulic cylinder for low-profile jack SX JACK 2.5t - spare part
  • Hydraulic cylinder for low-profile jack SX JACK 2.5t - spare part
  • Hydraulic cylinder for low-profile jack SX JACK 2.5t - spare part
  • Code: SX300701
  • EAN: 8595697702594
SixtolYou can purchase the goods from the seller Sixtol
In stock
21,69 Eur including VAT

Hydraulic cylinder for low-profile jack SX JACK 2.5t - replacement part SIXTOL

Replacement hydraulic cylinder for the mobile hydraulic jack SIXTOL SX JACK 2.5T. The hydraulic cylinder is an integral part of every jack that lifts the load.

Suitable for:
  • SIXTOL SX JACK 2.5 - SX3007 model year 2023 and later
  • GEKO - G02046
Technical parameters:
  • Dimension: 8 x 11.5 x 24.5
  • Weight: 2.85 kg

Main parameters

  • EAN8595697702594
  • CodeSX300701
  • Package weight2,85 kg
  • Package height8 cm
  • Package length24,5 cm
  • Package width11,5 cm
Full description and parameters Hide description and parameters
  • Hydraulic cylinder for low-profile jack SX JACK 2.5t - spare part
  • Hydraulic cylinder for low-profile jack SX JACK 2.5t - spare part
  • Hydraulic cylinder for low-profile jack SX JACK 2.5t - spare part

Your questions

Hello, could you please tell me the distance between the two mounting holes? And what is the diameter of the cylinder? Are the holes 20 mm?Thank you very much.

Hello, could you please tell me the distance between the two mounting holes? And what is the diameter of the cylinder? Are the holes 20 mm? Thank you very much.

Simon, 09. 02. 2026
de
Original message inde

Dobrý den,vzdálenost montážních otvorů je 21 cm od jejich středu.Průměr otvorů je 19,8 mm.

Hello,the center-to-center distance between the mounting holes is 21 cm.The diameter of the holes is 19.8 mm.

— Team Sixtol, 17. 02. 2026
Original message in

Dzień dobry, chciałbym się dowiedzieć ile wysuwa się siłownik SX Jack 2,5t. Chce go użyć do stołu nożycowego i nie wiem czy się nada. Ewentualnie prosiłbym o doradzenie jaki siłownik można wykorzystać do takiego stołu aby miał w miarę możliwości jak największe pole manewru. Pozdrawiam

Good morning, I would like to find out how far the SX Jack 2.5t actuator extends. I want to use it on a scissor lift table and I'm not sure if it's suitable. Alternatively, I would appreciate advice on which actuator could be used for such a table to provide, as far as possible, the greatest range of motion. Regards

Paweł, 26. 11. 2025
pl
Original message inpl

Dobrý den, píst vyjede o přibližně 9,5cm. Nejsem si jist na co chcete použít. Připadně bych zkusil hevery typu panenka jestli to nepomůže. Bottle Jack u nás naleznete v různých variantách.

Hello, the piston extends approximately 9.5 cm. I'm not sure what you want to use it for. Alternatively, I would try scissor-type jacks (the "panenka" type) to see if that helps. You can find Bottle Jack with us in various versions.

— Team Sixtol, 03. 12. 2025
Original message in

Dobrý den, je součástí i hydraulický olej nebo je potřeba po výměně doplnit? Děkuji.

Hello, is hydraulic oil included or does it need to be topped up after replacement? Thank you.

T., 25. 09. 2025
cs
Original message incs

Dobrý den, válec je naplněný olejem.

Hello, the cylinder is filled with oil.

— Team Sixtol, 28. 01. 2026
Original message in

Dobrý den, lze použít i pro SX JACK 2,5T 360°?

Hello, can it also be used for SX JACK 2.5T 360°?

Petr, 29. 07. 2025
cs
Original message incs

Dobrý den,bohužel nelze tento využít. Je to tam kvuli tomu otočnému trochu jinak.Nechcete jej vyservisovat? To nemáte doma určitě dlouho tak se na to můžeme podívat na záruku.  Mohu k Vám poslat případně i svoz. S pozdravem Michal.  

Hello,Unfortunately, this one cannot be used. It is a little different there because of the swivel.Do you want to have it serviced? You will definitely not be home for a long time, so we can look into it under warranty.  I can send it to you or collect it. Regards, Michal.  

— Team Sixtol, 01. 08. 2025
Original message in

Guten MorgenBitte Schicken Sie mir die genauen Anschluss-Maße (Fussbreite; Bohrungsdurchmesser usw. ) von dem Hydraulik-Zylinder.Code: SX300701MfGWerner Schmid

Good morningPlease send me the exact connection dimensions (base width, bore diameter, etc.) of the hydraulic cylinder.Code: SX300701Best regards,Werner Schmid

Werner, 29. 07. 2025
de
Original message inde

Hallo, die Basisbreite beträgt 7 cm. Der Durchmesser der Löcher beträgt oben jeweils 2 cm. Wir haben es für unseren 2,5 T Wagenheber.

Hello, the base width is 7 cm. The diameter of the holes at the top is 2 cm each. We have it for our 2.5 ton car jack.

— Team Sixtol, 01. 08. 2025
Original message in

Related goods

Latest customer questions

Scissor jack with ratchet SX SCISSOR JACK 2T

Scissor jack with ratchet SX SCISSOR JACK 2T - What are the dimensions of tthe rubber pad?

Jiří, 21. 11. 2025

Hello, the dimensions of the jack pad are 3.5x4.5cm.

— Team Sixtol, 24. 11. 2025
Workshop tool trolley MECHANIC TROLLEY JASON, 3 drawers, 1 shelf

Good morning,Will it be possible to purchase this stroller from you in the near future?Best regards

Tomasz, 15. 03. 2026

Hello, delivery to the warehouse will take place in the first half of April. We apologize for the inconvenience.

— Team Sixtol, 16. 03. 2026
Towbar bike carrier E-BIKE 2 - 2 electric bikes

Good morning, my name is Fernando Montero.I am writing to ask whether it would be possible to purchase the rails on which the bicycle wheels rest for your e-bike rack model (SX1014).Thank you very much for your attention.Regards.

Fernando, 01. 12. 2025

Hello, yes, that is possible. We can send it to you from our service center. Please write to us at info@sixtol.com and we will take care of it.

— Team Sixtol, 05. 12. 2025
Auto-darkening welding helmet WELDING MASK 2, red

Hello,Could you send me the user manual for the buttons inside the helmet?Kind regards,Sophie PÉRIER.

Sophie, 22. 01. 2026

Hello Madame PÉRIER,Thank you for your message. Here is the link to the document to download: https://www.sixtol.fr/casque-de-soudage-auto-obscurcissant-welding-mask-2-rouge.html#tab-documentsTo help you quickly, here is a summary of the controls inside the helmet:• Knob “Delay”: adjusts the time to return to the clear state after welding.• Knob “Sensitivity”: adjusts the filter sensitivity…

— Team Sixtol, 24. 01. 2026
OBD-II adapter 14-pin for Mercedes Benz Sprinter vehicles MECHANIC CABLE 5

Hello, I have a question. I need an adapter for diagnostics. I have a Mercedes-Benz Vario 815, year 2005, and I don't know whether it is the same as for the Sprinter. Thank you and have a nice day.

Václav, 28. 04. 2026

Hello, your vehicle has a 16-pin socket. No adapter is required.

— Team Sixtol, 28. 04. 2026
Towbar bike carrier BIKE 4 - 4 bikes

Hello, is it possible to purchase straps for the wheel attachment mechanism for the SIXTOL-4 carrier in a longer length than those originally supplied with the carrier?Thank you

Juraj, 19. 04. 2026

Hello, unfortunately not. We only offer two colors in the 27 cm length.

— Team Sixtol, 20. 04. 2026
Auto-darkening welding helmet WELDING MASK 2, red

The automatic darkening no longer works. Despite replacing the batteries.I bought the helmet in March

Kai, 18. 04. 2026

Hello, please send us your address to info@sixtol.com and cc this email. We will send you a new filter. We apologize for the inconvenience.

— Team Sixtol, 20. 04. 2026
Cap with LED light B-CAP 25 lm, rechargeable, USB, universal size, red

Hello, I've bought your hat via Amazon last year and now the battery seems working no more... Do you sell it separetely? Just the batteryThank you

Marco, 02. 09. 2025

Hello,write us an email at info@sixtol.com and we will send you a battery for free. We apologize for the inconvenience :-)

— Team Sixtol, 04. 09. 2025
AVM Freewheel 406HP - Land Rover

Good morning, I wanted to know whether the AVM406HP freewheel coupling would be suitable for an Iveco Massif. Thank you

Salvatore, 23. 03. 2026

Hello,thank you for your inquiry. According to AVM's application table, the model AVM 406MI is listed for the Iveco Massif. For the product AVM406HP we currently have inconsistent information on the website, so we cannot confirm its suitability for the Iveco Massif 100% at this time.To give you an exact answer, we recommend verifying compatibility by VIN / exact year of manufacture and type of…

— Team Sixtol, 25. 03. 2026
Protective car blanket for dogs CAR KESSIE

Hello!I would like to inquire whether the bottom of the cover is reinforced. The description does not include this information, but the pictures suggest it. I am looking for a cover with a rigid bottom.Thank you for your reply!Regina

Regina, 12. 04. 2026

Hello, yes, the bottom part consists of solid panels. We will add that to the description. Thank you for pointing it out.

— Team Sixtol, 13. 04. 2026
  • Over 4 000 products in stock
  • High-quality products
  • Strong international presence
  • Official vendor for Amazon
  • Over 80 sales partners