The liner is suitable for transporting cargo in the trunk/cargo area, is easy to wash, allows quick emptying of dirt and is easy to install by simply laying it out.
Quality
All cargo liners are provided with a TÜV Süd Czech certificate, a certificate on the composition and safety of the material MSDS, homologation according to the directives of the Czech Republic / European Union ATEST 8SD 3401 and in terms of flammability comply with the requirements of methodology ZM-A/10.70 (Czech Republic / European Union).
Maintenance
The liner is easy to wash and is designed for standard maintenance using common cleaning agents (e.g. washing with lukewarm water with a non-aggressive non-abrasive detergent, etc.). Cleaning can easily be carried out outside the vehicle, e.g. with a garden hose.
Stability
The quality of the material allows the liner to be used in a wide temperature range from -60°C to +80°C and also provides considerable resistance to material aging due to UV exposure.
Safety
Hypoallergenic material allows unrestricted use in any vehicle without any health risks.
Protection
The advantage of these liners is an increased edge of 4-6 cm (depending on the vehicle type), protecting the interior of the cargo area from spilling or pouring of liquids (water, oil), dirt, dust, snow, etc. into the trunk/cargo area, with resistance to penetration by oils, gasoline and other fuels and partial resistance to battery electrolyte.
Comfort
Movement of transported materials and items is effectively prevented by a high-quality full-surface non-slip layer on the top side that stops items placed on the mat from shifting during driving - an ideal helper when transporting groceries, luggage, etc.
Exact dimensions
The liner is manufactured precisely to the shape of the cargo floor of the specific vehicle model.
Design
Modern design ensures trouble-free use and an elegant appearance in the given vehicle type.
Materials
Recyclable, highly durable and quality material - microporous SBR rubber gives the liners extreme flexibility, ensuring that when bent (e.g. during storage) the liner returns to its original shape.
Good morning, I wanted to know whether the AVM406HP freewheel coupling would be suitable for an Iveco Massif. Thank you
Salvatore, 23. 03. 2026
Hello,thank you for your inquiry. According to AVM's application table, the model AVM 406MI is listed for the Iveco Massif. For the product AVM406HP we currently have inconsistent information on the website, so we cannot confirm its suitability for the Iveco Massif 100% at this time.To give you an exact answer, we recommend verifying compatibility by VIN / exact year of manufacture and type of…
Hello, can I transport 2 e-bikes and 2 children's bikes with this carrier? The children's bikes are one 16-inch and one 20-inch. Thank you in advance for a prompt reply.Kind regards
M, 28. 03. 2026
Hello,this rack is primarily intended for transporting 4 conventional bicycles, not e-bikes, mainly due to their higher weight.In the case of a combination of 2 e-bikes and 2 children's bikes, you must thoroughly check the total weight of all bikes. The rack's maximum load capacity is 60 kg and this value cannot be exceeded.We therefore recommend considering transporting the children's…
Hello,I would like to ask whether a load-distributing pad that fits between the jack and the car can be purchased for the Hydraulický zdvihák fľaškový SX BOTTLE JACK 4T.Or which jack would you recommend for a Mercedes‑Benz V‑Class?Thank you for your reply.Miroslav Hanzen
Miroslav, 28. 01. 2026
Hello, pán Hanzen,thank you for your inquiry. We don't have an original "load-distributing pad" for the SX BOTTLE JACK 4T (SX1146), but you can use a standard rubber pad/adapter for the jack (jack pad) between the jack and the vehicle's jacking point. For the Mercedes-Benz V‑Class the 4T capacity is fine; what's important is that the jack's minimum height (when lowered) fits under the car. If…
Hello,Could you send me the user manual for the buttons inside the helmet?Kind regards,Sophie PÉRIER.
Sophie, 22. 01. 2026
Hello Madame PÉRIER,Thank you for your message. Here is the link to the document to download: https://www.sixtol.fr/casque-de-soudage-auto-obscurcissant-welding-mask-2-rouge.html#tab-documentsTo help you quickly, here is a summary of the controls inside the helmet:• Knob “Delay”: adjusts the time to return to the clear state after welding.• Knob “Sensitivity”: adjusts the filter sensitivity…
Hello, which specific type of expander for the cup holder should I order for this original cup holder in the Kodiaq (the opening only fits a standard can)…
Karel, 15. 03. 2026
Hello Mr. Bárta,thank you for your inquiry.For the original cup holder in the Škoda Kodiaq you mentioned, we recommend using the SIXTOL CAR CUP HOLDER 5 model.This expander has an adjustable lower base ranging from 6.5 to 10 cm, so it will adapt even to smaller original holders (a standard can has a diameter of 6.5 cm). At the same time it has a top diameter of approximately 9.6 cm, which…
Good morning, my name is Fernando Montero.I am writing to ask whether it would be possible to purchase the rails on which the bicycle wheels rest for your e-bike rack model (SX1014).Thank you very much for your attention.Regards.
Fernando, 01. 12. 2025
Hello, yes, that is possible. We can send it to you from our service center. Please write to us at info@sixtol.com and we will take care of it.