Leveling clips set LEVEL SYSTEM T-HOLD 3mm, 200 pcs
Practical set of leveling clips SIXTOL LEVEL SYSTEM T-HOLD with 3 mm thickness for leveling tiles and slabs.
Full description
Leveling clips set LEVEL SYSTEM T-HOLD 3mm, 200 pcs SIXTOL
A set of quality leveling clips LEVEL SYSTEM T-HOLD for leveling tiles and coverings. These clips are used in combination with leveling wedges and pliers during laying to level tiles - insert the clips into the joints according to the joint width, insert the wedge into the clip and use the special leveling pliers to align the tiles or coverings into one plane. Once the adhesive under the tile has set, hit off the clips with the rubber mallet, finish the joints and you're done. Wedges, pliers and mallet are not included in this set and must be purchased as needed.Main advantages:
- Easy, quick and precise laying of tiles and coverings
- Eliminates height differences between tiles, so-called lippage
- Suitable for tiles and coverings of all materials and shapes
- 1. During laying, insert clips into the joints between tiles according to the desired joint width.
- 2. Insert wedges into all clips.
- 3. Use the leveling pliers to pull the first wedge into the clip until the tiles are level.
- 4. Using the first wedge as reference, tighten the locking screw on the pliers so that the rest of the tiles or coverings are pulled with the same force.
- 5. Tighten the remaining wedges.
- 6. After the adhesive has set (usually after 24 hours), remove the clips by striking them from the side in the direction of the joint with the rubber mallet.
- Note: Wedges can be reused.
- Note: For correct removal of clips with the mallet, the joint must be clean.
- 200 x Leveling clips 3 mm
- Thickness: 3 mm
- Width: 36 mm
- Height: 40 mm
- Material: plastic
- For tile thickness: 4 - 15 mm
Magnetic telescopic retriever MECHANIC PICK UP 2, 145-640mm
Towbar-mounted bike carrier E-BIKE 2 PREMIUM - 2 e-bikes, load capacity 60 kg, foldable
Head cross for WELDING welding helmet - spare part
Aluminum crossbar with lock ROOF RACK IN PRO, 120 cm, load capacity 90 kg
Scissor jack with ratchet SX SCISSOR JACK 2T
Towbar bike carrier E-BIKE 2 - 2 electric bikes
Workshop tool trolley MECHANIC TROLLEY JASON, 3 drawers, 1 shelf
Auto-darkening welding helmet WELDING MASK 2, red
Gasoline brushcutter GRASS CUT 3,8
Protective car blanket for dogs CAR KESSIE