Pliers for leveling clips LEVEL SYSTEM PRESS

Leveling pliers for clips LEVEL SYSTEM PRESS SIXTOL

High-quality leveling pliers LEVEL SYSTEM PRESS for leveling floor and wall tiles. Laying tiles to a level surface with the LEVEL SYSTEM PRESS pliers is very simple - insert the clips into the joints according to the joint width, slide the wedge into the clip and using the special leveling pliers level the floor or wall tiles to the same plane. Once the adhesive under the tiles has hardened, remove the clips by striking them with a rubber mallet, finish the joints and you're done.

Main advantages:

• Easy, quick and accurate installation of wall and floor tiles
• Eliminates height differences between wall and floor tiles, the so-called lippage
• Suitable for tiles and wall coverings of all materials and shapes

Usage:

• 1. During installation, insert clips into the joints between tiles according to the required joint width.
• 2. Insert wedges into all clips.
• 3. Using the leveling pliers, pull the first wedge into the clip until the tiles are level.
• 4. Using the first wedge as a reference, tighten the locking screw on the pliers so that the rest of the tiles are pulled with the same force.
• 5. Tighten the remaining wedges.
• 6. After the adhesive has hardened (typically after 24 hours) remove the clips by striking them from the side with a rubber mallet in the direction of the joint.
• Note: Wedges can be reused.
• Note: For proper removal of the clips with a mallet, the joint must be clean.

Package contents:

• 1 x Pliers for leveling clips

Technical specifications:

• Pliers length: 235 mm
• Max. opening of pliers: 70 mm
• Material: handle made of PP + galvanized steel