Set of leveling clips LEVEL SYSTEM T-HOLD 3mm, 500 pcs

Practical set of leveling clips SIXTOL LEVEL SYSTEM T-HOLD with a thickness of 3 mm for leveling wall and floor tiles.

Full description
Set of leveling clips LEVEL SYSTEM T-HOLD 3mm, 500 pcs
  • Code: SX3108
  • EAN: 8595697700842
SixtolYou can purchase the goods from the seller Sixtol
In stock
18,69 Eur including VAT

Set of leveling clips LEVEL SYSTEM T-HOLD 3mm, 500 pcs SIXTOL

A set of quality leveling clips LEVEL SYSTEM T-HOLD for aligning floor and wall tiles. These clips are used in combination with leveling wedges and pliers during tile installation to achieve a level surface - insert the clips into the joints according to the joint width, slide the wedge into the clip and using special leveling pliers level the floor or wall tiles to the same plane. Once the adhesive under the tiles has hardened, remove the clips by striking them with a rubber mallet, finish the joints and you're done. Wedges, pliers, and mallet are not included in this set and should be purchased separately if needed.

Main advantages:
  • Easy, quick and accurate installation of wall and floor tiles
  • Eliminates height differences between wall and floor tiles, the so-called lippage
  • Suitable for tiles and wall coverings of all materials and shapes
Usage:
  • 1. During installation, insert clips into the joints between tiles according to the required joint width.
  • 2. Insert wedges into all clips.
  • 3. Using the leveling pliers, pull the first wedge into the clip until the tiles are level.
  • 4. Using the first wedge as a reference, tighten the locking screw on the pliers so that the rest of the tiles are pulled with the same force.
  • 5. Tighten the remaining wedges.
  • 6. After the adhesive has hardened (typically after 24 hours) remove the clips by striking them from the side with a rubber mallet in the direction of the joint.
  • Note: Wedges can be reused.
  • Note: For proper removal of the clips with a mallet, the joint must be clean.
Package contents:
  • 500 x Leveling clips 3 mm
Technical specifications:
  • Thickness: 3 mm
  • Width: 36 mm
  • Height: 40 mm
  • Material: plastic
  • For tiles thickness: 4 - 15 mm

Main parameters

  • EAN8595697700842
  • CodeSX3108
  • Weight1,30 kg
Full description and parameters Hide description and parameters

Latest customer questions

Scissor jack with ratchet SX SCISSOR JACK 2T

Scissor jack with ratchet SX SCISSOR JACK 2T - What are the dimensions of tthe rubber pad?

Jiří, 21. 11. 2025

Hello, the dimensions of the jack pad are 3.5x4.5cm.

— Team Sixtol, 24. 11. 2025
Hydraulic cylinder for low-profile jack SX JACK 2.5t - spare part

Hello, could you please tell me the distance between the two mounting holes? And what is the diameter of the cylinder? Are the holes 20 mm? Thank you very much.

Simon, 09. 02. 2026

Hello,the center-to-center distance between the mounting holes is 21 cm.The diameter of the holes is 19.8 mm.

— Team Sixtol, 17. 02. 2026
Refractometer for measuring alcohol by volume AT 80 SIXTOL

Good morning, will the Refractometer for measuring alcohol by volume AT 80 SIXTOL also measure the alcohol percentage in liqueurs such as wiśniówka (cherry liqueur) and pigwówka (quince liqueur)?

Jakub, 29. 12. 2025

Hello,yes, it will measure. If the alcohol range is sufficient for you, you can measure anything that contains alcohol.Alcohol concentration: range: 0–60%; 60–80% (w/w); accuracy: 1%–2.5%Best regardsSIXTOL

— Team Sixtol, 02. 01. 2026
SX FIVE car diagnostics in CZ/SK/DE/EN/HU

I would like to know whether the "Diagnostica per auto SX FIVE" works with Opel astra sport tourer 1.7 CDTI 131cv from 2012, and whether it's in Italian. Thanks.

Marco, 24. 01. 2026

Good morning, yes, the SX FIVE vehicle diagnostics works with the 2012 Opel Astra Sport Tourer 1.7 CDTI 131 CV and is also available in Italian. Thank you.

— Team Sixtol, 24. 01. 2026
Towbar bike carrier E-BIKE 2 - 2 electric bikes

Good morning, my name is Fernando Montero.I am writing to ask whether it would be possible to purchase the rails on which the bicycle wheels rest for your e-bike rack model (SX1014).Thank you very much for your attention.Regards.

Fernando, 01. 12. 2025

Hello, yes, that is possible. We can send it to you from our service center. Please write to us at info@sixtol.com and we will take care of it.

— Team Sixtol, 05. 12. 2025
Hydraulic bottle jack SX BOTTLE JACK 4T

Hello,I would like to ask whether a load-distributing pad that fits between the jack and the car can be purchased for the Hydraulický zdvihák fľaškový SX BOTTLE JACK 4T.Or which jack would you recommend for a Mercedes‑Benz V‑Class?Thank you for your reply.Miroslav Hanzen

Miroslav, 28. 01. 2026

Hello, pán Hanzen,thank you for your inquiry. We don't have an original "load-distributing pad" for the SX BOTTLE JACK 4T (SX1146), but you can use a standard rubber pad/adapter for the jack (jack pad) between the jack and the vehicle's jacking point. For the Mercedes-Benz V‑Class the 4T capacity is fine; what's important is that the jack's minimum height (when lowered) fits under the car. If…

— Team Sixtol, 28. 01. 2026
Universal service cabinet key UNI SERVICE BOX 6

Hello,what are the dimensions of the square section, please?Thank you for your reply.

František, 01. 03. 2026

Hello,thank you for your inquiry.The internal dimension of the square is 7.6 mm.The external dimensions of the stepped square are 9 - 8 - 7 - 6 mm.Have a nice day.

— Team Sixtol, 05. 03. 2026
Cap with LED light B-CAP 25 lm, rechargeable, USB, universal size, red

Hello, I've bought your hat via Amazon last year and now the battery seems working no more... Do you sell it separetely? Just the batteryThank you

Marco, 02. 09. 2025

Hello,write us an email at info@sixtol.com and we will send you a battery for free. We apologize for the inconvenience :-)

— Team Sixtol, 04. 09. 2025
Rubber trunk tray for Kia Quoris K9 Sedan (KH) (13-)

Is it suitable for KIA Ceed 1.4 CVVT 74 kW Bronze (5-door, hatchback, 2019)? HBC98735

János, 23. 01. 2026

Hello,thank you for your inquiry. The code HBC98735 is unfortunately not suitable for the KIA Ceed 1.4 CVVT 74 kW (hatchback, 2019) — this tray is intended for the Kia Quoris / K9 Sedan (KH), so it will not fit the Ceed's trunk.

— Team Sixtol, 24. 01. 2026
Auto-darkening welding helmet WELDING MASK 2, red

Hello,Could you send me the user manual for the buttons inside the helmet?Kind regards,Sophie PÉRIER.

Sophie, 22. 01. 2026

Hello Madame PÉRIER,Thank you for your message. Here is the link to the document to download: https://www.sixtol.fr/casque-de-soudage-auto-obscurcissant-welding-mask-2-rouge.html#tab-documentsTo help you quickly, here is a summary of the controls inside the helmet:• Knob “Delay”: adjusts the time to return to the clear state after welding.• Knob “Sensitivity”: adjusts the filter sensitivity…

— Team Sixtol, 24. 01. 2026
  • Over 4 000 products in stock
  • High-quality products
  • Strong international presence
  • Official vendor for Amazon
  • Over 80 sales partners