The BATTERY ONE digital battery tester quickly evaluates the condition of the accumulator and charging directly on the vehicle thanks to a clear display and simple operation.
Full description
Dobrý den,lze tester používat na testování trakčních baterií, např baterie na dobíjení ze solárního panelu.Děkuji Chládek.
Hello,can the tester be used to test traction batteries, e.g. batteries charged from a solar panel.Thank you Chládek.
Dobrý den, děkujeme za Váš dotaz. Tester SIXTOL BATTERY ONE lze použít pro testování 12V olověných trakčních baterií (např. AGM nebo GEL) používaných v solárních systémech, není však vhodný pro lithiové baterie ani baterie s vyšším napětím než 12 V.
Hello, thank you for your inquiry. The SIXTOL BATTERY ONE tester can be used to test 12 V lead‑acid traction batteries (e.g. AGM or GEL) used in solar systems, but it is not suitable for lithium batteries or for batteries with a voltage higher than 12 V.
Scissor jack with ratchet SX SCISSOR JACK 2T - What are the dimensions of tthe rubber pad?
Hello, the dimensions of the jack pad are 3.5x4.5cm.
Good morning,Will it be possible to purchase this stroller from you in the near future?Best regards
Hello, delivery to the warehouse will take place in the first half of April. We apologize for the inconvenience.
Hello, I purchased SX3061 and SX3055 pads for the SX3007 lift. According to the description they should be compatible. Unfortunately neither pad fits into the notches on the lift's metal cup and only sits on it loosely without any lateral stability, and with a simple push by hand the pad slides off the metal cup. This does not seem like a stable solution I would feel confident lifting a car with.…
Hello, thank you for your inquiry. For these rubber pads the attachment is designed as universal, i.e. the pad is not firmly “snapped” into the jack cup but only sits on it loosely. The groove primarily serves for better seating of the vehicle’s sill, not for fixation to the jack itself.If the pad sits on the cup and does not slip off under load, this is normal and it can be used safely. If…
Good morning, my name is Fernando Montero.I am writing to ask whether it would be possible to purchase the rails on which the bicycle wheels rest for your e-bike rack model (SX1014).Thank you very much for your attention.Regards.
Hello, yes, that is possible. We can send it to you from our service center. Please write to us at info@sixtol.com and we will take care of it.
Hello,I would like to ask whether a load-distributing pad that fits between the jack and the car can be purchased for the Hydraulický zdvihák fľaškový SX BOTTLE JACK 4T.Or which jack would you recommend for a Mercedes‑Benz V‑Class?Thank you for your reply.Miroslav Hanzen
Hello, pán Hanzen,thank you for your inquiry. We don't have an original "load-distributing pad" for the SX BOTTLE JACK 4T (SX1146), but you can use a standard rubber pad/adapter for the jack (jack pad) between the jack and the vehicle's jacking point. For the Mercedes-Benz V‑Class the 4T capacity is fine; what's important is that the jack's minimum height (when lowered) fits under the car. If…
Hello, I've bought your hat via Amazon last year and now the battery seems working no more... Do you sell it separetely? Just the batteryThank you
Hello,write us an email at info@sixtol.com and we will send you a battery for free. We apologize for the inconvenience :-)
Hello, can I transport 2 e-bikes and 2 children's bikes with this carrier? The children's bikes are one 16-inch and one 20-inch. Thank you in advance for a prompt reply.Kind regards
Hello,this rack is primarily intended for transporting 4 conventional bicycles, not e-bikes, mainly due to their higher weight.In the case of a combination of 2 e-bikes and 2 children's bikes, you must thoroughly check the total weight of all bikes. The rack's maximum load capacity is 60 kg and this value cannot be exceeded.We therefore recommend considering transporting the children's…
Hello,Could you send me the user manual for the buttons inside the helmet?Kind regards,Sophie PÉRIER.
Hello Madame PÉRIER,Thank you for your message. Here is the link to the document to download: https://www.sixtol.fr/casque-de-soudage-auto-obscurcissant-welding-mask-2-rouge.html#tab-documentsTo help you quickly, here is a summary of the controls inside the helmet:• Knob “Delay”: adjusts the time to return to the clear state after welding.• Knob “Sensitivity”: adjusts the filter sensitivity…
Good morning, I wanted to know whether the AVM406HP freewheel coupling would be suitable for an Iveco Massif. Thank you
Hello,thank you for your inquiry. According to AVM's application table, the model AVM 406MI is listed for the Iveco Massif. For the product AVM406HP we currently have inconsistent information on the website, so we cannot confirm its suitability for the Iveco Massif 100% at this time.To give you an exact answer, we recommend verifying compatibility by VIN / exact year of manufacture and type of…
Good afternoon, is this rubber pad suitable for lifting a Hyundai Kona 2020 Electric car?
Hello, yes, the pad is suitable.
Scissor jack with ratchet SX SCISSOR JACK 2T
Workshop tool trolley MECHANIC TROLLEY JASON, 3 drawers, 1 shelf
Rubber pad JACK PAD 2 for low-profile jack SX JACK
Towbar bike carrier E-BIKE 2 - 2 electric bikes
Hydraulic bottle jack SX BOTTLE JACK 4T
Cap with LED light B-CAP 25 lm, rechargeable, USB, universal size, red
Towbar bike carrier BIKE 4 - 4 bikes
Auto-darkening welding helmet WELDING MASK 2, red
AVM Freewheel 406HP - Land Rover
Rubber pad for car jack JACK PAD 5