Pliers for leveling clamps LEVEL SYSTEM PRESS
Practical leveling pliers for leveling tiles and paving SIXTOL LEVEL SYSTEM PRESS.
Full description
Leveling clamp pliers LEVEL SYSTEM PRESS SIXTOL
Quality leveling clamps LEVEL SYSTEM PRESS for leveling tiles and wall coverings. Laying tiles levelly is very simple with the LEVEL SYSTEM PRESS clamps - you insert the clamps into the joints according to the width of the joint, insert a wedge into the clamp and use special leveling clamps to level the tiles or wall coverings to one level. Once the adhesive under the tiles has hardened, use a rubber mallet to knock the clamps down, fill the joints and you're done.Main advantages:
- Easy, fast and precise laying of tiles and paving stones
- Eliminates height differences between tiles and paving stones, so-called lippage
- Suitable for tiles and paving stones of all materials and shapes
- 1. During laying, insert clips with a width according to the desired joint width into the joints between the tiles or paving stones.
- 2. Insert wedges into all clips.
- 3. Use the leveling pliers to pull the first wedge into the clip until the tiles are level.
- 4. Screw the fixing screw on the pliers according to the first wedge to pull the rest of the paving stones or paving stones with the same force.
- 5. Tighten the rest of the wedges.
- 6. After the glue has set (usually after 24 hours), remove the clips by hitting them with a rubber mallet from the side in the direction of the joint.
- Note: The wedges can be used repeatedly.
- Note: The joint must be clean to properly remove the clips with a mallet.
- 1 x Leveling clip pliers
- Pliers length: 235 mm
- Max. opening of pliers: 70 mm
- Material: PP handle + galvanized steel
